------------ The e-series from Almatec ------------
|
||||
- Air-operated diaphragm pumps in solid design | ||||||||||||
- Housing made of PE or PTFE, both also available in a conductive version | ||||||||||||
- Suitable for: solvents, acids, corrosive and abrasive liquid, fluids containing solid parts | ||||||||||||
- Interchangeability to the A-Series | ||||||||||||
- Seven sizes from DN 8 to DN 80 | ||||||||||||
- Max. capacities of 0.9 to 48 m3/h | ||||||||||||
- Increased pump security due to innovative ring-tightening structure | ||||||||||||
- Compared to the A-Series, increased capacity and decreased air consumption thanks to the optimized flow pattern, decreased noise level | ||||||||||||
- ATEX conformity | ||||||||||||
- Exterior free of metal | ||||||||||||
- Optimized diaphragm fixing | ||||||||||||
- Different possible port configurations | ||||||||||||
- Ball or cylinder check valves with identical interior design | ||||||||||||
- Maintenance and lubrication-free air control system PERSWING P® without dead center | ||||||||||||
- Composite diaphragms with inte-grated metal core, no diaphragm discs | ||||||||||||
- Proof against dry running and overloading, self-priming, insensitive to solids | ||||||||||||
- Gentle displacement | ||||||||||||
- Can be infinitely controlled via the air volume | ||||||||||||
- No drives, no rotating parts, no shaft seals | ||||||||||||
- Unattended operation with long service life | ||||||||||||
- Easy to start up | ||||||||||||
- Integrated muffler | ||||||||||||
- Recessed tie rods | ||||||||||||
- Vibration dampers with female thread on the underside for simple direct installation | ||||||||||||
- Low noise levels |
- Optional features meeting requirements: | ||||||||||||
. | screw-on or flanged damper | |||||||||||
. | back flushing system | |||||||||||
. | barrier chamber system | |||||||||||
. | diaphragm monitor | |||||||||||
. | stroke counter | |||||||||||
. | flange connection | |||||||||||
. | transport cart | |||||||||||