RETURN to ProductRETURN to Pharmaceutical IndustryRETURN to New Equipment
 
------------ Thermocouples ------------
 
     
 
From your simple drawing or specifications, we produce high quality customized TC!
     
  - Profile and Spike Thermocouples: With a history deeply rooted in servicing semiconductor wafer fabrication, supplies highly reliable thermocouples in both simplex and duplex configurations with any combination of ceramic and lead length.
The materials are made according to internationally accepted standards as laid down in IEC 584.1,2 and 4 which is based on the International Temperature Scale 90 (ITS 90).

 

- Which TC to choose?


TYPE S {Pt-10%Rh(+) / Pt(-)} platinum-rhodium TC( 0°C up to +1600°C):
Normally used in oxidizing atmosphere.
For a long time, they were the basis of the International Practical Temperature Standard for the range 630°C -1064°C until the introduction of the ITS90.

TYPE R {Pt-13%Rh(+) / Pt(-)} (up to +1600°C):
Similar version to type S with a sensitivity between 6 and 14 µV/°C.

TYPE B
{Pt-30%Rh(+) / Pt-6%Rh(-)}
(up to +1700°C):
Very stable thermocouple but less sensitive especially in lower range which becomes negligible at room temperature.

TYPE C {Tu-5%Rhe(+) /Tu-Re26%(-)} (tungsten-rhenium TC: up to +2300°C):
These thermocouples (rigid or flexible) are used for very high temperature measurements, up to 2300°C in reducing neutral atmosphere, or vacuum.

 
It all boils down to cost saving!
Becoming expert in reducing costs for our customers. Concept is simple. By keeping a good admnistration of the TC's inventory at the customers site, with technical specifics, we can expedite the process of delivering a refurbished or new thermoelement at any time which a significant reduction in costs.
For some of our major customers this quality concept has found fertile ground.